PoE Media Converter options are able to transmit power and data. Options include single mode, multi-mode, and WDM (Wavelength-division multiplexing) fiber optic and 10/100/1000 Mbps copper media. Maximum PoE Wattage Deliverable: 30 WattsĮxternal Power Supply: Input: 100 to 240 V AC, 50 to 60 Hz Output: 48 V DC 0.83 Ampĭimensions: 4.02” L x 2.96” W x 0. Media converters serve as a bridge between fiber optic and copper media. PSE Power Feed Support: “Endpoint”, via TP pin 1, 2, 3, 6 This PoE Fiber Transceiver / Media Converter converts data signal between 10/100/1000Base-T and 1000Base-SX Gigabit Ethernet. Fiber optic types and distances spanned are SFP module-dependent The link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.ġ – RJ-45 10/100/1000BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port, plusġ – 1000Base SFP module receptacle port. The Far End Fault capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Moxas Ethernet to Fiber media converters feature innovative remote management, industrial-grade reliability, and a flexible, modular design that can fit any. The Link Fault Signaling capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. 10/100/1000Base-TX(RJ-45) x4 to 2 Open SFP Port POE Media Converter. The PoE Fiber Media Converter is a miniaturized media converter that is ideal for use in confined spaces. Email us Call 01908 760795 Sign In Register. A side-mounted slide switch is provided to enable and disable Link Fault Signaling and Far End Fault. Buy the Ubiquiti F-POE-G2 FiberPoE Outdoor Fibre-to-Ethernet Media Converter (24V/50V) for £25.68. This media converter is also equipped with power device signature-sensing, power monitoring features, and a 1000Base SFP receptacle, accepting a wide variety of 1000Base SFP modules for its fiber optic interface. The PoE+ power source equipment attribute allows the converter to provide power to either PoE or PoE+ powered devices using the twisted pair connection. Customizable media converter extends your copper Gigabit Ethernet network connection over fiber optic cable with the addition of PoE. The Signamax 10/100/1000 to 1000Base SFP PoE+ Media Converter is AC powered and combines data received over a fiber optic link with up to 25.5 Watts of PoE+ power at the end of a 100 meter cable run, which the powered devices can use in lieu of a separate power connector.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |